Roller doors are very efficient and are low maintenance and if installed correctly will give you years of problem free operation. Sometimes the nylofelt which runs down the side of both doors can be worn or ripped, it is a good idea to keep an eye on this and if you see it is rubbing your door may need a service to adjust the guides and correct any alignment problems.
We do not replace nylofelt. Generally a silicone spray sprayed in the guides and a wipe down will help your door to run efficiently.
Roller doors do have springs which very rarely break but we cannot replace these springs. If your door feels too heavy to lift manually, you may need your springs re-tensioned, a door that is not tensioned correctly will put extra strain on your opener and shorten it’s life.
To check tension of your door, put it into manual mode and lift the door half way. It should not drop or creep up and should be lifted easily.
DO NOT PUT GREASE ON ANY PART OF YOUR ROLLER DOOR.
Need a Service? Call now on (03) 9812 3062 to book in a time or make an enquiry.